Home › Car catalog › Renault › 10 › 10 (Phase II, 1967) › 1.1 (46 Hp) Automatic

RenaultRenault 10 (Phase II, 1967) 1.1 (46 Hp) Automatic1967, 1968, 1969, 1970, 1971: specs, Fuel consumption, Dimensions

1968 Renault 10 (Phase II, 1967) - Photo 1
Renault 10 (Phase II, 1967) - Photo 2Renault 10 (Phase II, 1967) - Photo 3Renault 10 (Phase II, 1967) - Photo 4Renault 10 (Phase II, 1967) - Photo 5Renault 10 (Phase II, 1967) - Photo 6Renault 10 (Phase II, 1967) - Photo 7Renault 10 (Phase II, 1967) - Photo 8Renault 10 (Phase II, 1967) - Photo 9Renault 10 (Phase II, 1967) - Photo 10

Key specs

Renault 10 (Phase II, 1967) 1.1 (46 Hp) Automatic /Sedan 1967 - 1971/
What is the body type of Renault 10 (Phase II, 1967)?
Sedan, 4 Doors, 5 Seats
What is the power output of Renault 10 Sedan 1967 1.1 (46 Hp) Automatic?
46 Hp, 78 Nm
58 lb.-ft.
What is the engine displacement of Renault 10 Sedan 1967 1.1 (46 Hp) Automatic?
1.1 l
1108 cm3
67.61 cu. in.
What is the number of cylinders in 1967 Renault 1.1 (46 Hp) Automatic?
4, Inline
What is the drivetrain of Renault 10 (Phase II, 1967) Sedan 1967 1.1 (46 Hp) Automatic?
Rear wheel drive. ICE. The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
What is the length of 1967 Renault 10 Sedan?
4191 mm
165 in.
What is the width of 1967 Renault 10 Sedan?
1524 mm
60 in.
What is the trunk (boot) capacity of 1967 Renault 10 Sedan?
315 l
11.1 cu. ft.
What are the number of gears and the gearbox type of 1967 Renault 10 (Phase II, 1967) 1.1 (46 Hp) Automatic?
3, automatic transmission
Renault 10 (Phase II, 1967) 1.1 (46 Hp) Automatic
Compare

General information

Brand
Model
Modification (Engine)
1.1 (46 Hp) Automatic
Start of production
1967
End of production
1971
Powertrain Architecture
Internal Combustion engine
Body type
Sedan
Seats
5
Doors
4
Looking for Renault 10 on the used-car market?
Check its history →

Performance specs

Fuel Type
Petrol (Gasoline)

Engine specs

Power
46 Hp @ 4600 rpm.
Power per litre
41.5 Hp/l
Torque
78 Nm @ 3000 rpm. 58 lb.-ft. @ 3000 rpm.
Engine layout
Rear, Longitudinal
Engine Model/Code
688.01
Engine displacement
1108 cm3 67.61 cu. in.
Number of cylinders
4
Engine configuration
Inline
Cylinder Bore
70 mm 2.76 in.
Piston Stroke
72 mm 2.83 in.
Compression ratio
8.5:1
Number of valves per cylinder
2
Fuel injection system
Carburettor
Engine aspiration
Naturally aspirated engine
Valvetrain
OHV
Engine oil capacity
2.5 l 2.64 US qt | 2.2 UK qt
Engine oil specification
Coolant
7.6 l 8.03 US qt | 6.69 UK qt

Volume and weights

Trunk (boot) space - minimum
315 l 11.1 cu. ft.
Fuel tank capacity
32 l 8.45 US gal | 7.04 UK gal

Dimensions

Length
4191 mm 165 in.
Width
1524 mm 60 in.
Height
1411 mm 55.55 in.
Wheelbase
2270 mm 89.37 in.
Front track
1254 mm 49.37 in.
Rear (Back) track
1219 mm 47.99 in.
Ride height (ground clearance)
127 mm 5 in.
Minimum turning circle (turning diameter)
9.2 m 30.18 ft.

Drivetrain, brakes and suspension specs

Drivetrain Architecture
The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive wheel
Rear wheel drive
Number of gears and type of gearbox
3 gears, automatic transmission
Front suspension
Independent coil spring, Anti-roll bar
Rear suspension
Independent coil spring
Front brakes
Disc, 259 mm
Rear brakes
Disc, 259 mm
Steering type
Steering rack and pinion
Tire size
145/80 R15
Wheel rim size
4J x 15