Jeep Wrangler IV (JL) Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic | Technical specs, data, fuel consumption, Dimensions

Key specs

Jeep Wrangler IV (JL) Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic /Off-road 2020 - 2023/

What is the body type of Jeep Wrangler IV (JL)?

Off-road, 2 Doors, 4 Seats

What is the fuel consumption and economy of Jeep Wrangler IV (JL) Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

11.8 l/100 km
19.9 US mpg
23.9 UK mpg
8.5 km/l

What is the power output of Jeep Wrangler Off-road 2020 Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

285 Hp, 353 Nm
260 lb.-ft.

What is the engine displacement of Jeep Wrangler Off-road 2020 Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

3.6 l
3604 cm³
219.93 cu. in.

What is the number of cylinders in 2020 Jeep Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

6, V-engine

What is the drivetrain of Jeep Wrangler IV (JL) Off-road 2020 Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

All wheel drive (4x4). MHEV (Mild Hybrid Electric Vehicle, power-assist hybrid, battery-assisted hybrid vehicles, BAHV). The Internal combustion engine (ICE) and the electric motor permanently drive the rear wheels of the vehicle, capable of running only in mixed mode, and if necessary through the electrically or mechanically controlled clutch, the front wheels are driven.

What is the length of 2020 Jeep Wrangler Off-road?

4237 mm
166.81 in.

What is the width of 2020 Jeep Wrangler Off-road?

1877 mm
73.9 in.

What is the kerb weight of 2020 Jeep Wrangler IV (JL) Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

1902 kg
4193 lbs.

What is the trunk (boot) capacity of 2020 Jeep Wrangler Off-road?

203 - 508 l
7.2 - 17.9 cu. ft.

What are the number of gears and the gearbox type of 2020 Jeep Wrangler IV (JL) Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic?

8, automatic transmission

Jeep
- Jeep Wrangler
  - Wrangler IV (JL)
    - Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic
    - Rubicon 3.6 Pentastar V6 (285 Hp) 4x4
    - Sport 2.0 Turbo (270 Hp) eTorque Mild Hybrid 4x4 Automatic
    - Sport 2.0 Turbo (270 Hp) 4x4 Automatic
    - Rubicon 2.0 Turbo (270 Hp) eTorque Mild Hybrid 4x4 Automatic
    - Sahara 2.2 CRDi (200 Hp) 4x4 Automatic
    - Rubicon 2.2 CRDi (200 Hp) 4x4 Automatic

Compare

General information

Brand

Jeep

Model

Wrangler

Generation

Wrangler IV (JL)

Modification (Engine)

Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic

Start of production

August, 2020

End of production

April, 2023

Powertrain Architecture

MHEV (Mild Hybrid Electric Vehicle, power-assist hybrid, battery-assisted hybrid vehicles, BAHV)

Body type

Off-road

Seats

Doors

Looking for Jeep Wrangler on the used-car market?

Check its history →

Performance specs

Fuel consumption (economy) - urban (EPA)

13.1 l/100 km 18 US mpg
21.6 UK mpg
7.6 km/l

Fuel consumption (economy) - extra urban (EPA)

10.2 l/100 km 23.1 US mpg
27.7 UK mpg
9.8 km/l

Fuel consumption (economy) - combined (EPA)

11.8 l/100 km 19.9 US mpg
23.9 UK mpg
8.5 km/l

Fuel Type

Petrol (Gasoline)

Weight-to-power ratio

6.7 kg/Hp, 149.8 Hp/tonne

Weight-to-torque ratio

5.4 kg/Nm, 185.6 Nm/tonne

Electric and hybrid car specs

Gross battery capacity

0.43 kWh

Battery voltage

48 V

Battery technology

Lithium-ion (Li-Ion)

Electric motor 1

Electric motor location

Front, Longitudinal

Internal combustion engine specs

Power

285 Hp @ 6400 rpm.

Power per litre

79.1 Hp/l

Torque

353 Nm @ 4800 rpm. 260 lb.-ft. @ 4800 rpm.

Maximum engine speed

6600 rpm.

Engine layout

Front, Longitudinal

Engine Model/Code

Pentastar / ERG

Engine displacement

3604 cm³ 219.93 cu. in.

Number of cylinders

Engine configuration

V-engine

Cylinder Bore

96 mm 3.78 in.

Piston Stroke

83 mm 3.27 in.

Compression ratio

11.3:1

Number of valves per cylinder

Fuel injection system

Multi-port manifold injection

Engine aspiration

Naturally aspirated engine

Valvetrain

DOHC

Engine oil capacity

4.73 l 5 US qt | 4.16 UK qt

Engine oil specification

Coolant

10.1 l 10.67 US qt | 8.89 UK qt

Engine systems

Start & Stop System

Volume and weights

Kerb Weight

1902 kg 4193 lbs.

Trunk (boot) space - minimum

203 l 7.2 cu. ft.

Trunk (boot) space - maximum

508 l 17.9 cu. ft.

Fuel tank capacity

66 l 17.44 US gal | 14.52 UK gal

Permitted trailer load with brakes (12%)

907 kg 2000 lbs.

Dimensions

Length

4237 mm 166.81 in.

Width

1877 mm 73.9 in.

Height

1868 mm 73.54 in.

Wheelbase

2460 mm 96.85 in.

Front track

1598 mm 62.91 in.

Rear (Back) track

1598 mm 62.91 in.

Front overhang

742 mm 29.21 in.

Rear overhang

1036 mm 40.79 in.

Ride height (ground clearance)

274 mm 10.79 in.

Minimum turning circle (turning diameter)

10.5 m 34.45 ft.

Approach angle

44°

Departure angle

37°

Ramp-over (breakover) angle

27.8°

Drivetrain, brakes and suspension specs

Drivetrain Architecture

The Internal combustion engine (ICE) and the electric motor permanently drive the rear wheels of the vehicle, capable of running only in mixed mode, and if necessary through the electrically or mechanically controlled clutch, the front wheels are driven.

Drive wheel

All wheel drive (4x4)

Number of gears and type of gearbox

8 gears, automatic transmission

Front suspension

Coil spring, Rigid axle suspension, Anti-roll bar

Rear suspension

Rigid axle suspension, Anti-roll bar, Coil spring

Front brakes

Ventilated discs, 330x28 mm

Rear brakes

Ventilated discs, 342x14 mm

Assisting systems

ABS (Anti-lock braking system)

Steering type

Recirculating-ball steering

Power steering

Electric Steering

Tire size

285/70 R17

Wheel rim size

7.5J x 17

Specs of Jeep Wrangler IV (JL) Rubicon 3.6 Pentastar V6 (285 Hp) eTorque Mild Hybrid 4x4 Automatic /2020, 2021, 2022, 2023/