Toyota Tundra III CrewMax Standard Bed 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i | Technical specs, data, fuel consumption, Dimensions

2022 Toyota Tundra III CrewMax Standard Bed - Photo 1

Key specs

Toyota Tundra III CrewMax Standard Bed 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i /Pick-up 2021 - /

What is the body type of Toyota Tundra III CrewMax Standard Bed?

Pick-up, 4 Doors, 5 Seats

How environmentally friendly is Toyota Tundra 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

LEV-III

What is the power output of Toyota Tundra Pick-up 2021 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

437 Hp, 790 Nm
583 lb.-ft.

What is the engine displacement of Toyota Tundra Pick-up 2021 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

3.4 l
3445 cm³
210.23 cu. in.

What is the number of cylinders in 2021 Toyota 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

6, V-engine

What is the drivetrain of Toyota Tundra III CrewMax Standard Bed Pick-up 2021 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

All wheel drive (4x4). FHEV (Full Hybrid Electric Vehicle). The Internal combustion engine (ICE) and the electric motor permanently drive the rear wheels of the vehicle, capable of running in full electric or mixed mode, and if necessary through the electrically or mechanically controlled clutch, the front wheels are driven.

What is the length of 2021 Toyota Tundra Pick-up?

6238 mm
245.59 in.

What is the width of 2021 Toyota Tundra Pick-up?

2037 mm
80.2 in.

What is the kerb weight of 2021 Toyota Tundra III CrewMax Standard Bed 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

2765-2805 kg
6096 - 6184 lbs.

What is the maximum permissible mass of 2021 Toyota Tundra III CrewMax Standard Bed 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

3279-3529 kg
7229 - 7780 lbs.

What are the number of gears and the gearbox type of 2021 Toyota Tundra III CrewMax Standard Bed 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i?

10, automatic transmission ECT-i

Toyota
- Toyota Tundra
  - Tundra III CrewMax Standard Bed
    - 3.5 V6 i-FORCE MAX (437 Hp) Hybrid ECT-i
    - 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i
    - 3.5 V6 i-FORCE (389 Hp) 4x4 ECT-i
    - 3.5 V6 i-FORCE (389 Hp) 4x2 ECT-i

Compare

General information

Brand

Toyota

Model

Tundra

Generation

Tundra III CrewMax Standard Bed

Modification (Engine)

3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i

Start of production

September, 2021

Powertrain Architecture

FHEV (Full Hybrid Electric Vehicle)

Body type

Pick-up

Seats

Doors

Looking for Toyota Tundra on the used-car market?

Check its history →

Performance specs

Fuel Type

Petrol (Gasoline)

Emission standard

LEV-III

Weight-to-power ratio

6.3 kg/Hp, 158 Hp/tonne

Weight-to-torque ratio

3.5 kg/Nm, 285.7 Nm/tonne

Electric and hybrid car specs

Gross battery capacity

1.87 kWh

Battery voltage

288 V

Battery technology

Nickel-metal hydride (NiMH)

Max speed (electric)

29 km/h 18 mph

Electric motor 1

Electric motor power

49 Hp

Electric motor Torque

250 Nm 184 lb.-ft.

Electric motor location

Between the combustion engine and the transmission

Electric motor type

Synchronous

Internal combustion engine specs

Power

437 Hp @ 5200 rpm.

Power per litre

126.9 Hp/l

Torque

790 Nm @ 2400 rpm. 583 lb.-ft. @ 2400 rpm.

Engine layout

Front, Longitudinal

Engine Model/Code

V35A-FTS

Engine displacement

3445 cm³ 210.23 cu. in.

Number of cylinders

Engine configuration

V-engine

Cylinder Bore

85.5 mm 3.37 in.

Piston Stroke

100 mm 3.94 in.

Compression ratio

10.4:1

Number of valves per cylinder

Fuel injection system

Direct injection and Multi-port manifold injection

Engine aspiration

Twin Turbo, Intercooler

Valvetrain

DOHC, Dual VVT-i

Engine oil capacity

7.3 l 7.71 US qt | 6.42 UK qt

Engine oil specification

Coolant

12.4 l 13.1 US qt | 10.91 UK qt

Engine systems

Particulate filter

Volume and weights

Kerb Weight

2765-2805 kg 6096 - 6184 lbs.

Max. weight

3279-3529 kg 7229 - 7780 lbs.

Max load

514-724 kg 1133 - 1596 lbs.

Fuel tank capacity

122 l 32.23 US gal | 26.84 UK gal

Permitted trailer load with brakes (12%)

5008 kg 11041 lbs.

Permitted towbar download

507 kg 1118 lbs.

Dimensions

Length

6238 mm 245.59 in.

Width

2037 mm 80.2 in.

Height

1981 mm 77.99 in.

Wheelbase

4006 mm 157.72 in.

Front track

1737 mm 68.39 in.

Rear (Back) track

1737 mm 68.39 in.

Ride height (ground clearance)

216 mm 8.5 in.

Drag coefficient (C_d)

0.36

Minimum turning circle (turning diameter)

15.2 m 49.87 ft.

Approach angle

21°

Departure angle

24°

Drivetrain, brakes and suspension specs

Drivetrain Architecture

The Internal combustion engine (ICE) and the electric motor permanently drive the rear wheels of the vehicle, capable of running in full electric or mixed mode, and if necessary through the electrically or mechanically controlled clutch, the front wheels are driven.

Drive wheel

All wheel drive (4x4)

Number of gears and type of gearbox

10 gears, automatic transmission ECT-i

Front suspension

Double wishbone, Anti-roll bar

Rear suspension

Rigid axle suspension, Coil spring

Front brakes

Ventilated discs, 353 mm

Rear brakes

Ventilated discs, 345 mm

Assisting systems

ABS (Anti-lock braking system)

Steering type

Steering rack and pinion

Power steering

Electric Steering

Tire size

265/60 R20

Wheel rim size

8J x 20

Specs of Toyota Tundra III CrewMax Standard Bed 3.5 V6 i-FORCE MAX (437 Hp) Hybrid 4WD-i ECT-i /2021, 2022, 2023, 2024, 2025, 2026/