Home › Car catalog › Compare

CompareMitsubishi Outlander IV (facelift 2024) 2.4 MIVEC (306 Hp) Plug-in Hybrid 4WD Automatic

Mitsubishi Outlander IV (facelift 2024)Mitsubishi Outlander IV (facelift 2024) 2.4 MIVEC (306 Hp) Plug-in Hybrid 4WD Automatic

General information

Brand
Mitsubishi
Model
Outlander
Generation
Outlander IV (facelift 2024)
Modification (Engine)
2.4 MIVEC (306 Hp) Plug-in Hybrid 4WD Automatic
Start of production
December, 2024
Powertrain Architecture
PHEV (Plug-in Hybrid Electric Vehicle)
Body type
SUV (Sport Utility Vehicle), Crossover
Seats
5
Doors
5

Performance specs

Combined fuel consumption (WLTP)
0.8 l/100 km
CO2 emissions (WLTP)
19 g/km
Fuel Type
Petrol / electricity
Acceleration 0 - 100 km/h
7.9 sec
Acceleration 0 - 62 mph
7.9 sec
Acceleration 0 - 60 mph
7.5 sec (Calculated by Auto-Data.net)
Maximum speed
170 km/h
Weight-to-power ratio
6.5 kg/Hp, 153.4 Hp/tonne
Weight-to-torque ratio
9.8 kg/Nm, 101.8 Nm/tonne

Electric and hybrid car specs

Gross battery capacity
22.7 kWh
Battery voltage
355 V
Battery technology
Lithium-ion (Li-Ion)
Battery location
Below the floor
Electric range (WLTP)
83-85 km
Average Energy consumption (WLTP)
23.4-23.5 kWh/100 km
Max speed (electric)
135 km/h
Charging ports
Log in to see.Log in to see.
Charging times
Log in to see.Log in to see.

Electric motor 1

Electric motor power
116 Hp
Electric motor Torque
255 Nm
Engine Model/Code
S91
Engine layout
Integrated into the transmission
Electric motor type
Synchronous

Electric motor 2

Electric motor power
136 Hp
Electric motor Torque
195 Nm
Engine Model/Code
YA1
Engine layout
Rear axle, Transverse
Electric motor type
Synchronous
System power
306 Hp

Internal combustion engine specs

Power
136 Hp @ 5000 rpm.
Power per litre
57.6 Hp/l
Torque
203 Nm @ 4000 rpm.
Engine layout
Front, Transverse
Engine Model/Code
4B12
Engine displacement
2360 cm3
Number of cylinders
4
Engine configuration
Inline
Cylinder Bore
88 mm
Piston Stroke
97 mm
Compression ratio
11.8
Number of valves per cylinder
4
Fuel injection system
Multi-port manifold injection
Engine aspiration
Naturally aspirated engine
Valvetrain
DOHC
Engine oil capacity
4.6 l
Engine oil specification
Log in to see.Log in to see.
Coolant
7.5 l
Engine systems
Start & Stop System
Particulate filter

Volume and weights

Kerb Weight
1995-2045 kg
Max. weight
2665 kg
Max load
620-670 kg
Trunk (boot) space - minimum
495 l
Trunk (boot) space - maximum
1404 l
Fuel tank capacity
53 l
Max. roof load
80 kg
Permitted trailer load with brakes (12%)
1600 kg
Permitted trailer load without brakes
750 kg
Permitted towbar download
80 kg

Dimensions

Length
4719 mm
Width
1862 mm
Width with mirrors folded
1897 mm
Width including mirrors
2144 mm
Height
1746-1750 mm
Wheelbase
2704 mm
Front track
1591 mm
Rear (Back) track
1597 mm
Front overhang
974 mm
Rear overhang
1041 mm
Ride height (ground clearance)
195-199 mm
Minimum turning circle (turning diameter)
11 m

Drivetrain, brakes and suspension specs

Drivetrain Architecture
An Internal combustion engine (ICE) drives the front wheels, one electric motor drives the front wheels, one electric motor drives the rear wheels. There is an ability for running in full electric or mixed mode.
Drive wheel
All wheel drive (4x4)
Number of gears and type of gearbox
1 gears, automatic transmission
Front suspension
Independent, McPherson type with coil spring and anti-roll bar
Rear suspension
Independent multi-link spring suspension with anti-roll bar
Front brakes
Ventilated discs
Rear brakes
Ventilated discs
Assisting systems
ABS (Anti-lock braking system)
Steering type
Steering rack and pinion
Power steering
Electric Steering
Tire size
235/60 R18; 255/45 R20
Wheel rim size
7.5J x 18; 8.0J x 20