Home › Car catalog › Compare

ComparePeugeot 3008 II (Phase II, 2020) 1.6 (300 Hp) Plug-in Hybrid4 e-EAT8

Peugeot 3008 II (Phase II, 2020)Peugeot 3008 II (Phase II, 2020) 1.6 (300 Hp) Plug-in Hybrid4 e-EAT8

General information

Brand
Peugeot
Model
3008
Generation
3008 II (Phase II, 2020)
Modification (Engine)
1.6 (300 Hp) Plug-in Hybrid4 e-EAT8
Start of production
September, 2020
End of production
September, 2023
Powertrain Architecture
PHEV (Plug-in Hybrid Electric Vehicle)
Body type
SUV (Sport Utility Vehicle)
Seats
5
Doors
5

Performance specs

Combined fuel consumption (WLTP)
1.3-1.4 l/100 km
CO2 emissions (WLTP)
30-32 g/km
Fuel Type
Petrol / electricity
Acceleration 0 - 100 km/h
5.9 sec
Acceleration 0 - 62 mph
5.9 sec
Acceleration 0 - 60 mph
5.6 sec (Calculated by Auto-Data.net)
Maximum speed
240 km/h
Emission standard
Euro 6d
Weight-to-power ratio
6.1 kg/Hp, 163.7 Hp/tonne
Weight-to-torque ratio
3.5 kg/Nm, 283.7 Nm/tonne

Electric and hybrid car specs

Gross battery capacity
13.2 kWh
Net (usable) battery capacity
10.4 kWh
Battery technology
Lithium-ion (Li-Ion)
Battery location
Below the floor, under the rear seats
Electric range (WLTP)
61-63 km
Average Energy consumption (WLTP)
15.3-15.9 kWh/100 km
Max speed (electric)
135 km/h
Charging ports
Log in to see.Log in to see.
Charging times
Log in to see.Log in to see.

Electric motor 1

Electric motor power
110 Hp/2500 rpm.
Electric motor Torque
320 Nm/500-2500 rpm.
Engine layout
Between the combustion engine and the transmission

Electric motor 2

Electric motor power
113 Hp/14000 rpm.
Electric motor Torque
166 Nm/0-4760 rpm.
Engine layout
Rear axle, Transverse
System power
300 Hp
System torque
520 Nm

Internal combustion engine specs

Power
200 Hp @ 6000 rpm.
Power per litre
125.2 Hp/l
Torque
300 Nm @ 3000 rpm.
Engine layout
Front, Transverse
Engine Model/Code
5GB EP6FADTXHPA
Engine displacement
1598 cm3
Number of cylinders
4
Engine configuration
Inline
Cylinder Bore
77 mm
Piston Stroke
85.8 mm
Compression ratio
10.2
Number of valves per cylinder
4
Fuel injection system
Direct injection
Engine aspiration
Turbocharger, Intercooler
Valvetrain
DOHC
Engine oil capacity
4.25 l
Engine oil specification
Log in to see.Log in to see.
Engine systems
Start & Stop System
Particulate filter

Volume and weights

Kerb Weight
1833 kg
Max. weight
2350 kg
Max load
517 kg
Trunk (boot) space - minimum
395 l
Trunk (boot) space - maximum
1357 l
Fuel tank capacity
43 l
Max. roof load
80 kg
Permitted trailer load with brakes (12%)
1250 kg
Permitted trailer load without brakes
750 kg
Permitted towbar download
70 kg

Dimensions

Length
4447 mm
Width
1841 mm
Width with mirrors folded
1906 mm
Width including mirrors
2098 mm
Height
1624 mm
Wheelbase
2675 mm
Front track
1579-1601 mm
Rear (Back) track
1587-1610 mm
Front overhang
923 mm
Rear overhang
849 mm
Ride height (ground clearance)
219 mm
Minimum turning circle (turning diameter)
10.7 m
Approach angle
20°
Departure angle
29°
Wading depth
700 mm

Drivetrain, brakes and suspension specs

Drivetrain Architecture
An Internal combustion engine (ICE) drives the front wheels, one electric motor drives the front wheels, one electric motor drives the rear wheels. There is an ability for running in full electric or mixed mode.
Drive wheel
All wheel drive (4x4)
Number of gears and type of gearbox
8 gears, automatic transmission e-EAT
Front suspension
Independent, McPherson type
Rear suspension
Semi-independent, coil spring
Front brakes
Ventilated discs
Rear brakes
Disc
Assisting systems
ABS (Anti-lock braking system)
Steering type
Steering rack and pinion
Power steering
Electric Steering
Tire size
225/55 R18; 205/55 R19
Wheel rim size
18; 19