Home › Car catalog › Compare

CompareMitsubishi Outlander III (facelift 2015) 2.0 MIVEC (203 Hp) Plug-in Hybrid 4WD

Mitsubishi Outlander III (facelift 2015)Mitsubishi Outlander III (facelift 2015) 2.0 MIVEC (203 Hp) Plug-in Hybrid 4WD

General information

Brand
Mitsubishi
Model
Outlander
Generation
Outlander III (facelift 2015)
Modification (Engine)
2.0 MIVEC (203 Hp) Plug-in Hybrid 4WD
Start of production
2015
End of production
2018
Powertrain Architecture
PHEV (Plug-in Hybrid Electric Vehicle)
Body type
SUV (Sport Utility Vehicle), Crossover
Seats
5
Doors
5

Performance specs

Fuel consumption (economy) - combined
1.7 l/100 km (NEDC)
CO2 emissions
41 g/km (NEDC)
Fuel Type
Petrol / electricity
Acceleration 0 - 100 km/h
11 sec
Acceleration 0 - 62 mph
11 sec
Acceleration 0 - 60 mph
10.5 sec (Calculated by Auto-Data.net)
Maximum speed
170 km/h
Emission standard
Euro 6
Weight-to-power ratio
9.2 kg/Hp, 109.1 Hp/tonne
Weight-to-torque ratio
9.8 kg/Nm, 102.2 Nm/tonne

Electric and hybrid car specs

Gross battery capacity
12 kWh
Battery voltage
300 V
Battery technology
Lithium-ion (Li-Ion)
Battery location
Below the floor
Electric range
54 km (NEDC)
Average Energy consumption
13.4 kWh/100 km (NEDC)
Max speed (electric)
120 km/h
Charging ports
Log in to see.Log in to see.
Charging times
Log in to see.Log in to see.

Electric motor 1

Electric motor power
82 Hp
Electric motor Torque
137 Nm
Engine Model/Code
S61
Engine layout
Integrated into the transmission

Electric motor 2

Electric motor power
82 Hp
Electric motor Torque
195 Nm
Engine Model/Code
Y61
Engine layout
Rear axle, Transverse
System power
203 Hp

Internal combustion engine specs

Power
121 Hp @ 4500 rpm.
Power per litre
60.6 Hp/l
Torque
190 Nm @ 4500 rpm.
Engine layout
Front, Transverse
Engine Model/Code
4B11
Engine displacement
1998 cm3
Number of cylinders
4
Engine configuration
Inline
Cylinder Bore
86 mm
Piston Stroke
86 mm
Compression ratio
10.5
Number of valves per cylinder
4
Fuel injection system
Multi-port manifold injection
Engine aspiration
Naturally aspirated engine
Valvetrain
DOHC
Engine oil capacity
4.6 l
Engine oil specification
Log in to see.Log in to see.
Coolant
6.5 l
Engine systems
Start & Stop System

Volume and weights

Kerb Weight
1860-1880 kg
Max. weight
2370 kg
Max load
490-510 kg
Trunk (boot) space - minimum
463 l
Fuel tank capacity
45 l
Permitted trailer load with brakes (12%)
1500 kg

Dimensions

Length
4695 mm
Width
1800 mm
Width including mirrors
2120 mm
Height
1710 mm
Wheelbase
2670 mm
Front track
1540 mm
Rear (Back) track
1540 mm
Front overhang
990 mm
Rear overhang
1035 mm
Ride height (ground clearance)
190 mm
Minimum turning circle (turning diameter)
10.6 m
Approach angle
21.0°
Departure angle
22.5°
Ramp-over (breakover) angle
19.0°
Wading depth
400 mm

Drivetrain, brakes and suspension specs

Drivetrain Architecture
An Internal combustion engine (ICE) drives the front wheels, one electric motor drives the front wheels, one electric motor drives the rear wheels. There is an ability for running in full electric or mixed mode.
Drive wheel
All wheel drive (4x4)
Front suspension
Independent, McPherson type with coil spring and anti-roll bar
Rear suspension
Independent multi-link spring suspension with anti-roll bar
Front brakes
Ventilated discs, 294 mm
Rear brakes
Disc, 302 mm
Assisting systems
ABS (Anti-lock braking system)
Steering type
Steering rack and pinion
Power steering
Electric Steering
Tire size
215/70 R16; 225/55 R18
Wheel rim size
6.5J x 16; 7J x 18